Thermo Scientific Evolution 201 - Page 401

26
SPE-8W Smart Peltier Linear Cell Changer
Thermo Scientific Evolution 200 Series User Guide 387
Y Changing the set temperature
1. Highlight Set Temperature.
The Change Set Point page is displayed with down and up arrows above the Left and
Center buttons.
2. Use the down and up arrow buttons to change the set temperature.
3. When the desired set temperature is displayed, press Change to return to the Startup
page.
Y Setting the stirring speed
1. Highlight Stirring Speed.
2. The Change Set Point page is displayed with down and up arrows above the Left and
Center buttons.
3. Use the down and up arrow buttons to change the stirring speed.
4. When the desired stirring speed is reached, press Change to return to the Startup page.
Parameters Menu
•Use the Left and Center buttons to scroll the screen up and down.
•Use the Right button to exit the screen and return to the Main Menu.
Table 8. Normal Mode functions
Page Display Description Left button Center button Right button
Change Set
Point
Flashing selected
parameter
Change Temperature or
Stirring Speed Set Point
Down Up Change
Main Menu Parameter User Parameters Scroll Select Exit
Configure Configuration Parameters Scroll Up Exit
Diagnostic Diagnostic Values Down Up Exit
Table 9. User parameters and button functions
Number Description Default value
P-01 Temperature units °C
P-02 Auto start NO
P-03 Display contrast 5
P-04 Beeper YES
P-05 Manual reset pre-alarm NO