26
SPE-8W Smart Peltier Linear Cell Changer
Thermo Scientific Evolution 200 Series User Guide 391
6. Set the other measurement parameters as desired. See the Settings tab for the selected
application.
7. To measure a blank without using the sample list, click Measure Fixed and then click
Zero (or Measure Scan and then Baseline).
The Loading Guide shows one entry for the blank measurement.
Place the approproate material (or nothing) in position 1 of the cell changer and click OK
to perform the measurement.
8. Click Measure.
A dialog box shows the current sample list.
9. Set Number of samples to the number of samples to be measured.
10. Use Load Samples to import the sample list or enter sample names and descriptions if
desired. See Settings > Samples to create the list ahead of time.
11. Click OK.
The loading guide shows the measurement sequence for the cell changer as defined in the
sample list.
To Next Page
Loading...
