Toro TX525 - Page 124

ENGINE
4-71TX525 Service Manual Rev. 000
33. Capthehydrauliclineandttingsodebrisdoesnot
enterthesystem.
34. Placeanabsorbenttowelundertheoilcooleroutlet
linettinglocatedontheupperrighthandcornerof
the oil cooler.
35. Using1-1/16”and1-1/8”wrenches,removethe
hydraulicoiloutletlinefromtheoilcooleroutlet
tting(Fig.0339).
Fig 0339 PICT-4968a
36. Capthehydrauliclineandttingsodebrisdoesnot
enterthesystem.
37. Usinga1/2”socket,removethe3boltssecuringthe
frontradiatormounttotheframe(Fig.0340).
Fig 0340 PICT-4969
38. Removethefrontradiatormount(Fig.0341).
Fig 0341 PICT-4971