Toro TX525 - Page 409

DRIVE SYSTEM
7-32 Rev. 000 TX525 Service Manual
10. Position the heat shield (Fig. 1380).
Fig 1380 Belt 005
11. Using a 3/16” Allen wrench, install the 2 upper heat
shield screws (Fig. 1381).
Fig 1381 Belt 004
12. Using a 1/2” wrench, install the 2 lower heat shield
screws (Fig. 1382).
Fig 1382 Belt 002
13. Support the hood and install the prop rod (Fig.
1383).
Fig 1383 Belt 003