ABB IRC5 - 4 Repair Activities, Controller IRC5

3 Maintenance activities, controller IRC5
3.4.3. Cleaning the FlexPendant
1813HAC021313-001 Revision: K
© Copyright 2004-2008 ABB. All rights reserved.
Do's and don'ts!
The section below specifies some special considerations when cleaning the FlexPendant.
Always:
• use ESD Protection
• use cleaning equipment as specified above! Any other cleaning equipment may
shorten the life time of the touch screen.
• check that all protective covers are fitted to the device before cleaning!
• make sure that no foreign objects or liquids can penetrate into the device.
Never:
• remove any covers before cleaning the FlexPendant!
• spray with a high pressure cleaner!
• clean the device, operating panel and operating elements with compressed air,
solvents, scouring agent or scrubbing sponges.
Continued