Agilent Technologies 5DX Service Guide

Agilent 5DX Service Guide 5-27
5DX Series 3 XYZ Stage Assembly
Panel Clear Sensor Configuration
The red light on the sensor amplifier should be on when no panels are present. If it
in not on, verify that the amplifier switches are set as shown in Figure 5-15.
The green light on the sensor amplifier is for stability, and it is not used by the
5DX.
47 Clear/Blocked Panel Optical Sensor Rear Panel Right Outer Barrier Clear
48 Clear/Blocked Panel Optical Sensor Rear Panel Left Outer Barrier Clear
Table 5-6: Panel Clear Sensor
Input Bit
Number
Hardware Status and Control
Description
Digital I/O Assembly Description

Agilent Technologies 5DX Specifications

General

Brand	Agilent Technologies
Model	5DX
Category	Medical Equipment
Language	English