3CALCulate Subsystem
84 U2000 Series Programming Guide
CALCulate Subsystem
The CALCulate subsystem performs post acquisition data processing.
Functions in the SENSe subsystem are related to data acquisition, while the
CALCulate subsystem operates on the data acquired by a SENSe function.
There is an independent CALCulate block in the power sensor, as shown in
Figure 3- 1.
Figure 3-1 Measurement Display CALCulate Block Window
Figure 3- 2 details where the commands are applied within the CALCulate
block.
Figure 3-2 CALCulate Block
To Next Page
Loading...
