Agilent Technologies U2000 Series

MEASurement Commands 2
U2000 Series Programming Guide 69
CONFigure[1]?
This query returns the present configuration of the current
window/measurement.
Syntax
The string returned depends on the setting of the CALCulate:MATH
commands.
The configuration is returned as a quoted string in the following format:
“<function> <expected_value>,<resolution>,<source list>”
<expected_value> returns the expected value sent by the last CONFigure
command or +20 dBm by default.
Example
?
CONF
1
CONF1? This command queries the configuration
of the current window/measurement.