STATus Subsystem 9
U2000 Series Programming Guide 241
Questionable Register Sets
The questionable register sets contain information which gives an indication
of the quality of the data produced by the power sensor. The contents of the
individual registers in these register sets may be accessed by appending the
commands listed in “Status Register Set Commands” on page 226.
The following command descriptions detail the SCPI register you require to
control but do not detail the register set commands.
The three questionable register sets are:
STATus:QUEStionable
STATus:QUEStionable:CALibration[:SUMMary]
STATus:QUEStionable:POWer[:SUMMary]
To Next Page
Loading...
Need help?
General
