Agilent Technologies U2000 Series

MEMory Subsystem 6
U2000 Series Programming Guide 135
MEMory:CLEar[:NAME] <character_data>
This command clears the contents of a specified frequency dependent offset
table, or save/recall register.
Although the table remains, a MEMory:TABLe:FREQuency|GAIN:POINts?
query returns a 0 as there are no contents in the table.
For frequency dependent offset tables, this command is an alternative form of
the MEMory:CLEar:TABLE command, the only difference being the method in
which the table is selected.
NOTE
The contents cleared using this command are non-recoverable.