STATus Subsystem 9
U2000 Series Programming Guide 237
STATus:OPERation:SENSe[:SUMMary]
The operation status sense summary register set contains information on the
status of the power sensor.
The following bits in these registers are used by the power sensor:
These bits are set when the power sensor is reading data from the power
sensor non- volatile memory.
These bits are cleared when the power sensor is not reading data from the
power sensor non- volatile memory.
Syntax
Bit
Number
Decimal
Weight
Definition
0- Not used
1 2 Current window SENSe Status
24Not used
3-15 - Not used
To Next Page
Loading...
