Agilent Technologies U2000 Series - 5 Format Subsystem; Format[:Readings]:Border CharacterData

FORMat Subsystem 5
U2000 Series Programming Guide 121
FORMat[:READings]:BORDer <character_data>
This command controls whether the binary data is transferred in normal or
swapped Byte ORDer. It is only used when FORMat[:READings][:DATA] is
set to REAL.
Syntax
Parameters
Example
Reset Condition
On reset, this value is set to NORMal.
Item Description/Default Range of Values
character_data Byte order of binary data transfer:
• NORMal
• SWAPped
NORMal
SWAPped
FORM:BORD SWAP This command sets the byte order to
swapped.
FORM
:READ :BORD
Space
?
character_data