Agilent Technologies U2000 Series Guide

6MEMory Subsystem
134 U2000 Series Programming Guide
MEMory:CLEar Commands
These commands are used to remove the frequency dependent offset tables
and save/recall registers. This subsystem removes the data contents but does
not affect the name of the associated table or save/recall register.
The following commands are detailed in this section:
MEMory:CLEar:[NAME] <character_data>
MEMory:CLEar:TABLe
NOTE
The contents cleared using these commands are non-recoverable.

Agilent Technologies U2000 Series Specifications

General

Brand	Agilent Technologies
Model	U2000 Series
Category	Accessories
Language	English