Agilent Technologies U2000 Series Guide

9 STATus Subsystem
232 U2000 Series Programming Guide
Operation Register Sets
The following registers contain information which is part of the power
sensor’s normal operation. The contents of the individual registers of these
register sets may be accessed by appending the commands listed in “Status
Register Set Commands” on page 226.
The following command descriptions detail the SCPI register you require to
control but do not detail the Register Set commands.
The seven Operation Register Sets are:
STATUS:OPERation
STATus:OPERation:CALibrating[:SUMMary]
STATus:OPERation:LLFail[:SUMMary]
STATus:OPERation:MEASuring[:SUMMary]
STATus:OPERation:SENSe[:SUMMary]
STATus:OPERation:TRIGger[:SUMMary]
STATus:OPERation:ULFail[:SUMMary]
Further information on these register sets is provided on the following pages.

Agilent Technologies U2000 Series Specifications

General

Brand	Agilent Technologies
Model	U2000 Series
Category	Accessories
Language	English