8SERVice Subsystem
215 U2000 Series Programming Guide
SERVice:SENSor[1]:POWer:USABle:MINimum?
This query returns the minimum power that can be accurately measured in
dBm unit by the currently connected sensor. Maximum power information is
stored in the sensor’s non- volatile memory.
Syntax
Example
Error Messages
• If the U2000 Series USB Power Sensor currently connected does not
contain the necessary information in non- volatile memory, error –241
“Hardware missing” occurs.
SERV:SENS:POW:USAB:MIN? This query returns the minimum power
that can be accurately measured by the
U2000 Series USB Power Sensor.