Agilent Technologies U2000 Series Guide

TRIGger Subsystem 11
U2000 Series Programming Guide 287
TRIGger[:SEQuence[1]]:IMMediate
This command provides a one time over- ride of the normal process of the
downward path through the wait for trigger state. It causes the immediate exit
of the event detection layer if the trigger system is in this layer when the
command is received. In other words, the instrument stops waiting for a
trigger and takes a measurement ignoring any delay set by TRIG:DELay.
Syntax
Example
TRIG:SEQ:IMM This command initiates a measurement
on the sensor.
:IMM
TRIG
:SEQ
1

Agilent Technologies U2000 Series Specifications

General

Brand	Agilent Technologies
Model	U2000 Series
Category	Accessories
Language	English