8SERVice Subsystem
213 U2000 Series Programming Guide
SERVice:SENSor[1]:POWer:AVERage:MAXimum?
This query returns the maximum average power that can be measured in dBm
unit by the currently connected sensor. Maximum average power information
is stored in the sensor’s non- volatile memory.
Syntax
Example
Error Messages
• If the U2000 Series USB Power Sensor currently connected does not
contain the necessary information in non- volatile memory, error –241
“Hardware missing” occurs.
SERV:SENS:POW:AVER:MAX? This query returns the maximum average
power that can be measured by the U2000
Series USB Power Sensor.
To Next Page
Loading...
Need help?
General
