Agilent Technologies U2000 Series - Calculate[1]:Limit:state Boolean

CALCulate Subsystem 3
U2000 Series Programming Guide 101
CALCulate[1]:LIMit:STATe <boolean>
This command enables/disables the test limits for the current
window/measurement.
Syntax
Example
Reset Condition
On reset, limit checking is disabled.
Query
CALCulate[1]:LIMit:STATe?
The query enters 1 or 0 into the output buffer indicating the status of the
limits testing feature for the current window/measurement.
• 1 is returned when limits testing is enabled
• 0 is returned when limits testing is disabled
CALC1:LIM:STAT 1 This command enables the limit checking
function for the current
window/measurement.
0|OFF
1|ON
Space
?
:LIM
:STAT
CALC
1