Agilent Technologies U2000 Series

7SENSe Subsystem
183 U2000 Series Programming Guide
[SENSe[1]]:CORRection:FDOFfset|GAIN4[:INPut][:MAGNitude]
?
This command is used to return the frequency dependent offset currently
being applied.
Syntax
Example
Reset Condition
On reset, the frequency dependent offset is not affected.
CORR:GAIN4? This command queries the current
frequency dependent offset being applied
to current measurement.
SENS
1
:GAIN4
CORR
:
:FDOFfset
:INP
:MAG
?