7SENSe Subsystem
202 U2000 Series Programming Guide
SENSe[1]:TEMPerature?
This this command to returns the power sensor’s temperature in degrees
Celsius.
Syntax
Parameters
Example
Reset Condition
On reset, this parameter is not affected.
Error Messages
• If a U2000 Series USB Power Sensor is not connected, error –241,
“Hardware missing” occurs.
Item Description/Default Range of Values
numeric_value A numeric value defining sensor's temperature
in degrees Celsius.
–50 to 100
SENS1:TEMP? This command returns the current sensor
temperature.
To Next Page
Loading...
