Agilent Technologies U2000 Series Guide

7SENSe Subsystem
181 U2000 Series Programming Guide
[SENSe[1]]:CORRection:DCYCle|GAIN3:STATe <boolean>
This command is used to enable and disable the pulse power measurement
feature.
The [SENSe[1]]:CORRection:DCYCle|GAIN3 command should be used to
enter the duty cycle of the signal you want to measure.
Syntax
Example
Reset Condition
On reset, the pulse power measurement feature is disabled.
Query
[SENSe[1]]:CORRection:DCYCle|GAIN3:STATe?
The query enters a 1 or 0 into the output buffer indicating the status of the
pulse power measurement feature.
CORR:DCYC:STAT 1
This command enables the pulse
measurement feature.
1
:STAT
0|OFF
1|ON
Space
?
:DCYCCORR:SENS
:GAIN3

Agilent Technologies U2000 Series Specifications

General

Brand	Agilent Technologies
Model	U2000 Series
Category	Accessories
Language	English