Agilent Technologies U2000 Series

SYSTem Subsystem 10
U2000 Series Programming Guide 257
SYSTem:PRESet <character_data>
This command presets the power sensor to values appropriate for measuring
the communications format specified by <character_data>. The power sensor
is preset to default values if no value or the value DEFault is supplied.
Syntax
Parameters
Example
NOTE
DEFault settings apply to both *RST and to
SYSTem:PREset DEFault unless stated otherwise.
Item Description Range of Values
character_data A communications format which determines
the preset values.
DEFault
SYST:PRES DEF This command presets the power sensor
with default values. The same default
values are set when the parameter is
omitted.
SYST
:PRES
Space
character_data