SERVice Subsystem 8
U2000 Series Programming Guide 212
SERVice:SENSor[1]:FREQuency:MINimum?
This query returns the minimum frequency that can be measured in MHz unit
by the currently connected sensor. It is applicable toU2000 Series USB power
sensors only. Minimum frequency information is stored in the sensor’s
non- volatile memory.
Syntax
Example
Error Messages
• If the U2000 Series USB Power Sensor currently connected does not
contain the necessary information in non- volatile memory, error –241
“Hardware missing” occurs.
SERV:SENS1:FREQ:MIN? This query returns the minimum
frequency that can be measured by the
U2000 Series USB Power Sensor
currently.
To Next Page
Loading...
