Agilent Technologies U2000 Series

MEMory Subsystem 6
U2000 Series Programming Guide 151
MEMory:TABLe:FREQuency:POINts?
This query returns the number of frequency points for the table currently
selected. The response format is <NRf>. If no frequency values have been set,
this command returns 0. If no table is selected, this command returns NAN.
Syntax
Example
MEM:TABL:FREQ:POIN? This command queries the number of
frequency points in the current table.
MEM
:TABL
:POIN
?
:FREQ