Agilent Technologies U2000 Series - Page 115

CALCulate Subsystem 3
U2000 Series Programming Guide 97
Example
Reset Condition
On reset, the current window/measurements are set to –90.00 dBm or –90 dB
(DEF).
Query
CALCulate[1]:LIMit:LOWer[:DATA]? [MIN|MAX]
The query returns the current setting of the lower limit or the values
associated with MIN and MAX for the current window.
Query Example
CALC1:LIM:LOW:DATA 0.1 This command enters a lower limit for the
current window/measurement depending
on the window’s units as follows:
dBm = 0.1 dBm
W = 100 mW
dB = 0.1 dB
% = 0.1 %
CALC1:LIM:LOW:DATA? This command queries the lower limit set
for the current window /measurement.