7SENSe Subsystem
164 U2000 Series Programming Guide
Parameters
Example
Reset Condition
On reset, the filter length is set to four.
Query
AVERage:COUNt? [MIN|MAX]
The query returns the current setting of the filter length or the values
associated with MIN and MAX. The format of the response is <NR1>.
Item Description/Default Range of Values
numeric_value A numeric value defining the filter length.
DEF: the default value is 4
MIN: 1
MAX: 1024
1 to 1024
DEF
MIN
MAX
AVER:COUN 400 This command enters a filter length of 400
for power sensor.
To Next Page
Loading...
