Agilent Technologies U2000 Series Guide

SENSe Subsystem 7
U2000 Series Programming Guide 199
• 1 is returned when the upper range is selected
• 0 is returned when the lower range is selected
Query Example
Error Messages
This command is used with the U2000 Series USB power sensors. If one is not
connected the error –241, “Hardware missing” occurs.
POW:AC:RANG? This command queries the current setting
of the power sensor range.
NOTE
For U2000 Series USB power sensors, the auto ranging feature will be disabled when
trigger modes are selected.

Agilent Technologies U2000 Series Specifications

General

Brand	Agilent Technologies
Model	U2000 Series
Category	Accessories
Language	English