Agilent Technologies U2000 Series

12 UNIT Subsystem
294 U2000 Series Programming Guide
Parameters
Example
Reset Condition
On reset, all windows/measurements are set to DBM.
Query
UNIT[1]:POWer?
The query returns the current setting of the power measurement units.
Query Example
Item Description/Default Range of Values
amplitude_unit The measurement unit.
• The default unit is dBm
W
DBM
UNIT1:POW DBM This command sets the power
measurement units for the current
window/measurement.
UNIT1:POW? This command queries which
measurement units are being used on the
current window/measurement.