82 •
••
• CANopen QUICKDESIGNER
PLC Comm Errors
In the event of a communication problem, error messages are displayed on a status line at the bottom
of the display.
Error Displayed Definition
PLC COMM ERROR (02:C0) Detected wrong or missing I/O card
PLC COMM ERROR (02:C1) I/O card failed to initialize and start
PLC COMM ERROR (02:C2) Invalid configuration, must match master
PLC COMM ERROR (02:C3) Undefined
PLC COMM ERROR (02:C4) Startup error, S1 file failed to open
PLC COMM ERROR (02:C5) Startup error, watchdog failure
PLC COMM ERROR (02:C6) Startup error, memory failure
PLC COMM ERROR (02:C7) Startup error, undefined
PLC COMM ERROR (02:C8) I/O Card error, command error
PLC COMM ERROR (02:C9) I/O Card error, status error
PLC COMM ERROR (02:CA) I/O Card error, Link Inactive
PLC COMM ERROR (02:CB) I/O Card error, BBRAM error
PLC COMM ERROR (02:CC) Comm error, PLC not responding
PLC COMM ERROR (02:CD) Comm error, I/O Link error
PLC COMM ERROR (02:CE) Comm error, Improper or invalid response
PLC COMM ERROR (02:CF) Comm error, undefined
To Next Page
Loading...
