Anritsu ML2437A - Page 276

System Defaults
B-4 PN: 10585-00001 Rev. P ML2437A/38A OM/PM
graph averaging state off
between cursor average on
SENSOR - offset
offset type off
offset type ( HP437B ) off
offset type ( HP438A ) fixed offset type = fixed
offset value 0 dB
offset type = table
table number 1
frequencies 0 Hz
offset values 0 dB
SENSOR - duty cycle
duty cycle state off
duty cycle 100 %
CHANNEL - setup
input config chan 1 = A, chan 2 = off
input config ( HP437B & HP438A ) chan 1 = A, chan 2 = off
meas units dBm
meas units ( HP437B ) dBm
meas units ( HP438A ) watts
display resolution 2 decimal places
tracking min/max display off
CHANNEL – relative off
CHANNEL - limits
high limit 0 dBm
high limit ( HP437B ) 90 dBm
high limit ( HP438A ) 0 dBm
low limit 0 dBm
low limit ( HP437B ) -90 dBm
low limit ( HP438A ) 0 dBm