System Defaults
ML2437A/38A OM/PM PN: 10585-00001 Rev. P B-5
high limit enabled off
low limit enabled off
fail indicator hold off
fail beep control off
TRIGGER
SYSTEM - setup = readout or Power vs. Time
SENSOR - meas mode = default std trigger mode
SENSOR - meas mode = mod average std trigger mode
SENSOR - meas mode = custom
TRIGGER - setup
source continuous
sample delay 1 ms
sample gate width 20 ms
source = continuous, manual
trigger arming blanking off
source = internal A, internal B
trigger arming blanking off
trigger type rise
trigger level > -15 dBm
source = external TTL
trigger edge rise
SYSTEM - setup = profile
TRIGGER - setup
source continuous
sample delay 1 ms
sample gate width 20 ms
source = continuous, manual
trigger arming blanking off
source = internal A, internal B
trigger arming blanking off
To Next Page
Loading...
