77
Chapter 2
Hardware Setup
Mounting
For convenience and flexibility, the transmitters can be mounted onto a system
racks or wall.
Note: Optional mounting options are available, refer to Optional Rack Mount
on page 414 for more information.
It is highly recommended to mount AiT unit(s) onto a system rack or
wall and avoid a stacked setup to ensure proper ventilation.
The following sections demonstrate how to mount transmitters using the
mounting kit provided.
1. Important safety information regard the placement of this device
is found on. Please review it before proceeding.
2. Make sure that the power of all devices to be connected is turned
off. You must unplug the power of any computers with Keyboard
Power-on function.
3. Please operate the device with caution when under high
environmental temperatures, as the surface of the device may
become overheated under such conditions. For instance, the
surface temperature of the device may reach 70 ºC (158 ºF) or
higher when the environmental temperature reaches close to 50 ºC
122 ºF.
To Next Page
Loading...
