Chapter 6. System Status
247
Select a Location and click this icon to change the name.
/ Click to turn Beeper & LED Flashing on/off.
Click to delete selected Receivers.
Click an option to have selected Receivers:
Copy & Paste: Copy settings from one Receiver and paste them
to another (see Copy & Paste, page 251).
Reboot: Shut down and restart.
Reset to Factory: Reset all setting to the factory default.
Note: The Reset to Factory function resets everything but the login
information to the factory default settings. To reset the login
information, refer to Reset All Information on page 423.
Click to Create Receiver Group or Video Wall (page 253 & 254).
Click to set Receiver permissions (page 257).
Click to search for Receivers.
Click to filter Receivers shown on the page.
Click to switch between Grid View and List View.
SFP Module Detection
When an SFP module is used on the Receiver added, the CCKM can
automatically detect and display its type, between Fiber and Copper, as
exemplified below.
To Next Page
Loading...
