Chapter 5. Browser / Telnet Operation
209
Installation Wizard
Use the Install Wizard to add transmitters, receivers, and/or network switches
to the CCKM. The wizard locates devices on the network and walks you
through adding them. To add devices, do the following:
1. Connect all transmitters, receivers, and/or network switches to the LAN.
2. On the CCKM main page, click the Install Wizard icon (page 207). This
dialog box appears.
To add transmitters and/or receivers, select Transmitter or Receiver,
click Next, and refer to Adding Transmitters and Receivers, page 210.
To add network switches, select Network Switch, click Next, and
refer to Adding Network Switches, page 213.
To Next Page
Loading...
