ATEN KE6900T - ATEN Matrix Link; Overview; Requirements; Accessing CCKM

315
Chapter 11
ATEN Matrix Link
Overview
The ATEN Matrix Link is a mobile app that allows users to access the CCKM
server from an iPad for convenient remote monitoring and management.
Requirements
Before using ATEN Matrix Link, make sure your iPad meets the following
requirements:
 Running iPadOS 9.0 or later
 Has ATEN Matrix Link app installed, available from the App Store.
 Connected to the same network as the CCKM server.
IMPORTANT:To use ATEN Matrix Link, the CCKM server’s license must be
activated.
Accessing CCKM
1. On the ATEN Matrix Link app, enter the IP address and service port value
of the CCKM server, and tap Connect, as exemplified below.