KVM over IP Matrix System User Manual
236
The transmitter can either have its DNS server address assigned automatically,
or a fixed address can be specified.
For automatic DNS Server address assignment, select the Obtain DNS
server address automatically radio button.
To specify a fixed address, select the Set DNS server address manually
radio button and fill in the required information.
Note: Specifying at the alternate DNS Server address is optional.
IPv6 Settings
The transmitter can either have its IPv6 address assigned dynamically at boot-
up (DHCP), or it can be given a fixed IPv6 address.
For dynamic IP address assignment, select the DHCP radio button. (This
is the default setting.)
To specify a fixed IP address, select the Manual radio button and fill in the
IP address.
The transmitter can either have its DNS server address assigned automatically,
or a fixed address can be specified.
For automatic DNS Server address assignment, select the Obtain DNS
server address automatically radio button.
To specify a fixed address, select the Set DNS server address manually
radio button and fill in the required information.
Note: Specifying at the alternate DNS Server address is optional.
Private Certificate
When logging in over a secure (SSL) connection, a signed certificate is used to
verify that the user is logging in to the intended site. For enhanced security, the
Private Certificate section allows you to use your own private encryption key
and signed certificate, rather than the default ATEN certificate.
There are two methods for establishing your private certificate: generating a
self-signed certificate and importing a third-party certificate authority (CA)
signed certificate.
To Next Page
Loading...
Need help?
General
