KVM over IP Matrix System User Manual
254
Note: You can create up to 4 receiver groups.
Video Wall
Creating a Video Wall allows you to create connections that combine Receiver
displays to form a large video wall. Use the options to group multiple Receivers
in the video wall. A video wall can contain multiple forms of single displays
and grouped displays in various layouts. Video Walls appear listed below
Receivers, on the Receivers settings page.
To create a Video Wall, in Receiver settings, click and then select Create
Video Wall.
Select the number of displays and then group multiple displays to form large
screens and/or use single displays for independent screens to create the video
wall's layout. Click the bar -- under the display icon to select a Receiver for
each display. This configuration should match the actual video wall layout.
Cancel Click Cancel to exit without saving.
Item Description
Name Enter a name for the Video Wall.
Item Description
To Next Page
Loading...
