ATEN KE6900T - System; Transmitter Configuration

KVM over IP Matrix System User Manual
172
System
The System tab allows you to configure the Receiver’s general settings:
After entering the information, click Save.
Transmitter Configuration
Item Description
Device
Information
Enter the Name, and Description of the Receiver. It also
displays the IP Address, MAC Address, F/W Version, and Serial
Number of the Receiver.
Reboot Check the box and click Reboot to reset the Receiver’s settings
back to the factory default. All custom settings (but not the login
information) will be lost.
Receiver
Password
Change
Check Enable to require a password for access to the
Receiver’s OSD configuration screen. Enter the Old Password,
enter a New Password, and confirm the new password in the
Confirm Password box.