ATEN KE6900T - Modifying Users; Deleting Users

KVM over IP Matrix System User Manual
264
3. When your selections have been made click Apply.
4. When the Operation Succeeded message appears, click OK.
5. The new user appears on the main panel.
 The columns show the Username; User Level, Status, OSD Language,
Description; and Group.
Modifying Users
To modify a user, do the following:
1. In the main panel, double-click the user’s name.
2. In the Edit User page that comes up, make your changes, then click Apply.
Deleting Users
To delete a user, do the following:
1. In the main panel, check the box next to the user’s name.
2. Click .
3. Click OK.
Welcome Message If you want the Welcome Message to appear on screen when
the user logs into the KVM over IP Matrix Manager, select
Enable.
If you want the user's Screen Name to appear with the
Welcome Message, check the Username check box.
Group Click Select and check a box to add the user to a group.
Apply Click Apply to save the changes.
Cancel Click Cancel to exit without saving.
Field Description