ATEN KE6900T - SNMP

KVM over IP Matrix System User Manual
292
SNMP
 SNMP Trap & SNMP Agent
To be notified of SNMP trap events, do the following:
1. Check Enable SNMP Trap.
2. Enter the Primary Server IP and the Service Port of the PC / server to
be notified of SNMP trap events.
3. Enter the Redundancy Server IP and the Service Port of the
redundant PC /server to be notified of SNMP trap events.
4. Fill in the Community field.
5. Check Enable SNMP Agent.
6. Check / uncheck the SNMP Agents for sending SNMP trap events.
Note: To add additional SNMP Agents, you must first Disable SNMP
Agent.
7. Click Save.