ATEN KE6900T - Rack Mount; Non-Slim Transmitters

Chapter 2. Hardware Setup
81
Rack Mount
Non-Slim Transmitters
Note: Steps for non-slim transmitters (KE6900, KE6900A, KE6900AiT,
KE6910, KE6912, KE6920, KE6922, KE6940, KE6940A,
KE6940AiT, KE8950, KE8952, KE9950, and KE9952) are the same,
and are exemplified using KE6900.
Screw the mounting bracket on a convenient location of the rack.
Note: Rack screws are not provided. We recommend the use of M5 x 12
Phillips Type I cross recessed screws.