KVM over IP Matrix System User Manual
368
List Command
The List command allows you to retrieve information about users, settings and
connections.
The formula for the List command is as follows:
Command + Output + Input + Number + Control [Enter]
1. For example, for a complete list of available channels, type the following:
list channel [Enter]
2. For example, for a complete list of available profiles, type the following:
list profile [Enter]
3. For example, to list all users logged into all OSD menus, type the
following:
4. list login [Enter]
5. For example, to list the user logged into the OSD on Receiver
(192.168.0.44), type the following:
list o192.168.0.44 login [Enter]
6. For example, for a complete list of available connections, type the
following:
list connection [Enter]
7. For example, to list the current connections on Transmitter (192.168.0.88),
type the following:
list i192.168.0.88 connection [Enter]
The following tables show the possible values for the List command
:
Command Description
list List command
Output Description
o Output command
Input Description
i Input command
Number Description
xx Output or Input number
xx: Device ID or IP address
To Next Page
Loading...
