ATEN KE6900T - KE9950; KE9952 Point-to-Point Installation 2 of 2

Chapter 2. Hardware Setup
117
Note: Power adapters are not provided with the KE9952. Please contact your
ATEN dealer to purchase additional power adapters, or use the Power
over Ethernet (PoE) feature to supply power to the KE9952.
KE9950 / KE9952 Point-to-Point Installation 2 of 2
Note: The serial port on the Transmitter (shown above) connects to the
computer; the serial port on the Receiver (not shown) connects to a
serial device (optional).