Chapter 14. CLI Commands
359
Profile Command
The Profile command allows you to connect profiles and video walls.
The formula for Profile commands is as follows:
Command + Profile + Num1 + Control + [Enter]
1. For example, to connect profile 8 and lock the OSD menu, type the
following:
profile f8 [Enter]
2. For example, to connect profile 4 with access to the OSD menu, type the
following:
profile f4 release [Enter]
3. For example, to disconnect profile 12 and return to the Receiver to the
OSD menu, type the following:
profile f12 back [Enter]
The following tables show the possible values for the Profile commands:
Command Description
profile Profile command
Profile Description
f Profile ID
Num1 Description
xx Profile or Video Wall ID
xx: 1-99
Control Description
lock Connect profile, lock access to
OSD menu (default)
release Connect profile, allow access to
OSD menu
back Disconnect profile, return
Receiver to OSD menu
To Next Page
Loading...
