KVM over IP Matrix System User Manual
360
The following table lists the available Profile commands:
Note: 1. Each command string can be separated with a space.
2. The Control command string can be skipped and lock will be used by
default.
3. For functional lock and release commands, make sure the Lock OSD
when connecting option is checked during Create Profile. Refer to
Lock OSD, page 271 for more information.
Command Profile Num1 Control Description
profile f xx lock Connect profile xx, lock
OSD access
xx:1~99
profile f xx release Connect profile xx, allow
OSD access
xx:1~99
profile f xx back Disconnect profile xx
and return Receiver to
OSD menu
xx: 1~99
To Next Page
Loading...
