ATEN KE6900T - Network Switch Configuration

Chapter 6. System Status
259
 Click to filter Network Switches shown on the page.
 Click to switch between Grid View and List View.
Network Switch Configuration
When Network Switches are added to the KVM over IP Matrix Manager, they
appear on the Switch settings page. Double-click a Network Switch to
configure its settings.
Optionally click Re-sync parameters to automatically update the Network
Switch by enabling IGMP Snooping, IGMP Querier, Fast Leave, Unregistered
Multicast Flooding, Flow Control, and Speed Mode (Auto for Port 1-48 / 10
Gbps FDX for Port 49-52).
Item Description
Basic Device Name: Enter a name for the Network Switch.
Description: Enter a description for the Network Switch.
Location: Use the drop-down menu to select a Location for the
device. Locations filter the Network Switches seen on the settings
page.