KVM over IP Matrix System User Manual
300
Backup / Restore
The Backup/Restore tab is divided into three panels: Backup, Restore, and
Export Device List:
The operations to perform backup/restore procedures are described in the table
below and in the section that follows:
Procedure Operation
Backup Backs up the KVM over IP Matrix Manager configuration – including
profile and schedule configurations, user and group accounts, user
profiles, logs, and system settings.
Restore Deletes the current profile and schedule configurations, user and
group accounts, user profiles, logs, and system settings; then
restores those settings to the values that exist in the previously saved
backup file.
Export Device
List
Clicking Export allows you to save a file with a complete list of the
devices added to the KVM over IP Matrix Manager. The file contains
the ID, name, description and IP address of each transmitter and
receiver. An Existing column also lists if the device is available: Yes, it
exists and is available, or No, it is offline or has been removed.
To Next Page
Loading...
