KVM over IP Matrix System User Manual
246
Receiver
Click Receiver in the System Status panel to open the settings. The Receiver
page allows you to add, delete and configure Receivers (physical receivers),
Receiver Groups, and Video Walls. The KVM over IP Matrix Manager
automatically adds Receivers connected to the local area network with a valid
IP address.
The meanings of the icons and headings on the page are straightforward and let
you view and configure Receivers.
Active refers to a Receiver connection that is online and in use.
Standby refers to a Receiver connection that is online.
Offline refers to a Receiver connection that is offline.
Use this drop-down menu to filter Receivers by location.
Use Locations to limit the Receivers seen on the page.
Click to add a new Location.
Select a Receiver and click the Move to icon to add devices
to a Location.
Select a Location from the drop-down menu and click this
icon to delete it.
To Next Page
Loading...
