Chapter 5. Browser / Telnet Operation
207
The KVM over IP Matrix Manager Main Page
After you have successfully logged in, the web browser’s main page appears:
Web Components
The web components are described in the table below:
No. Item Description
1 Install Wizard This icon helps you locate Transmitters/Receivers
on the LAN to add them to the KVM over IP Matrix
Manager (see Installation Wizard, page 209). If a
device can’t be found, check the Network settings in
the device’s OSD menu (see page 163 & 173).
2 System Settings Click this icon to enter the System Setting section
where you can configure the KVM over IP Matrix
Manager. The Settings are discussed on page 275.
3 Logout Click this button to log out of your KVM over IP
Matrix Manager web session.
4 Interactive Display Panel This is your main work area. Scroll the page up or
down to view the various selections. Some items can
be clicked to open a settings page, while others
provide status information.
5 Instant Link Clicking this icon opens the lower bar which allows
you to instantly connect KE devices. Instant Link is
discussed on page 215.
6 KE & KX Toggle Click this button to switch between KE and KX
Series device configuration page.
To Next Page
Loading...
