ATEN KE6900T - KE6910; KE6912 Point-to-Point Installation 1 of 2

Chapter 2. Hardware Setup
95
11. (Optional) For power redundancy, plug the second power adapters into AC
sources with the power cords; then plug the other ends into the transmitter
and receiver’s power jacks.**
12. Power on the computer.
Note: 1. The SFP module 2A-136G / 2A-137G is sold separately. Contact your
ATEN dealer for product information.
2. Available for KE6910T and KE6910R only. The second power
adapter with the power cord is sold separately. Contact your ATEN
dealer for product information. Power redundancy for KE6912T and
KE6912R can be achieved with the PoE function.
KE6910 / KE6912 Point-to-Point Installation 1 of 2